GW Instek GDS-2000A series User Manual - Manual (Page 120)

GDS-2000A Series User Manual
120
Measurement
List Puts all the measurement
results for a segment in a list.
All the currently selected
automatic measurement results
are listed. A maximum of 8
automatic measurements can be
used with this function.
Note To use automatic measurements with the
segmented memory, automatic measurements
must first be selected from the Measure menu
before the segmented memory function is run.
Digital channels cannot be used with this function.
Setup Press the Measure key and select
any single source measurement
from the Add Measurement menu.
See page 76 for details on how to
add automatic measurements.
Measure
Operation 1. Press Analyze Segments from the
Segments menu.
Note: This key will only be
available in the Stop mode.
2. Press Segments Measure.
3. Select either the
statistics or the
measurement list from
the side menu.
Statistics List