GW Instek GDS-2000A series User Manual - Manual (Page 116)

GDS-2000A Series User Manual
116
Rerun Segmented
Acquisition 1. To rerun the segments, press the Segments Stop
key to toggle the mode back to the Segments
Run mode.
Alternatively, press the Run/Stop
key again.
Run/Stop
2. Repeat steps 3 and 4 in the section above when
the segmented acquisition has completed.
The scope is now ready to navigate or analyze the
acquired segments.
Navigate Segmented Memory
Background After the segmented memory acquisitions have
been captured you can navigate through each
segment one at a time.
Operation 1. Press Select Segments from the
bottom menu. This key will be
available in the Stop mode.
2. To navigate to the segment of
interest, press Current Seg from the
side menu and use the Variable
knob to scroll to the segment of
interest.
Alternatively, the Set to Minimum
and Set to Maximum keys can be
used to jump to the first and last
segment respectively.