GW Instek GDS-2000A series User Manual - Manual (Page 155)

CONFIGURATION
155
5. To Delay by Time (Duration), press
Time from the side menu and set
the delay time.
Range 10ns ~ 10s (by time)
Set to minimum
6. To Delay by Event, press Event
from the side menu and set the
number of events.
Range 1 ~ 65535 events
Set to Minimum
Using Pulse Width (Glitch) Trigger
Panel Operation 1. Press the trigger Menu key.
Menu
2. Press the Type key from the lower
bezel menu.
3. Select Pulse Width from the side
menu. The pulse width (glitch)
trigger indicator appears at the
bottom of the display.
From left: source, polarity, when, coupling
4. Press Source from the lower bezel.