GW Instek GDS-2000A series User Manual - Manual (Page 254)

GDS-2000A Series User Manual
254
Probe Specifications
GTP-070A-4
Applicable to: GDS-2072A & GDS-2074A
Position X10 Attenuation Ratio 10:1
Bandwidth DC to 70MHz
Input Resistance 10MΩ when used with oscilloscopes
with 1MΩ input.
Input Capacitance 28pF~32pF
Compensation Range 25pF~ 45pF
Max. Input Voltage ≤600Vpk, Derating with frequency
Position X1 Attenuation Ratio 1:1
Bandwidth DC to 6MHz
Input Resistance 1MΩ when used with 1MΩ input
Input Capacitance 120pF~220pF
Max. Input Voltage ≤200Vpk, Derating with frequency
Safety EN61010-031 CAT II
GTP-150A-2
Applicable to: GDS-2102A & GDS-2104A
Position X10 Attenuation Ratio 10:1
Bandwidth DC to 150MHz
Rise Time 2.3nS
Input Resistance 10MΩ when used with oscilloscopes
with 1MΩ input.
Input Capacitance Approximately 17pF
Compensation Range 10 to 35pF
Max. Input Voltage
Position X1 Attenuation Ratio 1:1
Bandwidth DC to 6MHz
Rise Time 58nS
Input Resistance 1MΩ (Oscilloscope Input)
Input Capacitance 47pF plus oscilloscope capacitance
Max. Input Voltage 300V CAT I, 150V CAT II (DC + peak
AC) derating with frequency.
Safety EN61010-031 CAT II
500V CAT I, 300Vrms CAT II derating
with frequency.