GW Instek GDS-2000A series User Manual - Manual (Page 252)

GDS-2000A Series User Manual
252
Control Panel
Function Autoset Single-button, automatic setup of all channels for
vertical, horizontal and trigger systems, with undo
Autoset
Save Setup 20set
Save Waveform 24set
Display TFT LCD Type 8" TFT LCD SVGA color display
Display
Resolution 800 horizontal × 600 vertical pixels (SVGA)
Interpolation Sin(x)/x & Equivalent Time Sampling
Waveform
Display Dots, vectors, variable persistence (16ms~10s),
infinite persistence
Waveform
Update Rate 80,000 waveforms per second, maximum
Display
Graticule 8 x 10 divisions
Display Mode YT, XY
Interface RS232C DB-9 male connector X1
USB Port USB 2.0 host port X2,
USB 2.0 device port X1: USB 2.0 full speed (CDC-
ACM)
Ethernet Port
(LAN) RJ-45 connector, 10/100Mbps with HP Auto-MDIX,
IEEE802.3 (option)
Go-NoGo BNC 5V Max/10mA TTL open collector output
SVGA Video
Port SVGA output (option)
GPIB GPIB module, IEEE488.2 (option)
Kensington
Style Lock Rear-panel security slot connects to standard
Kensington-style lock.
Logic Analyzer
(Option) Sample Rate 500MSa/s
Bandwidth 200MHz
Record Length 2M max/ch
Input Channels 16 Digital (D15 - D0) or 8 Digital (D7~D0)
Trigger type Edge, Pattern, Pulse Width, Serial bus (I2C, SPI,
UART)
Thresholds Quad-D0~D3, D4~D7. . . . Thresholds
Threshold
selections TTL, CMOS, ECL, PECL, User Defined
User-defined
Threshold
Range ±10V
Maximum
Input Voltage ±40V
Minimum
Voltage Swing ±500mV