GW Instek GDS-2000A series User Manual - Manual (Page 129)

CONFIGURATION
129
Freeze the Waveform (Run/Stop)
For more details about Run/Stop mode, see page 68.
Panel Operation 1. Press the Run/Stop key. The
Run/Stop key turns red and
waveform acquisition is
paused.
Run/Stop Run/Stop
2. The waveform and the trigger
freezes. The trigger indicator on
the top right of the display shows
Stop.
3. To unfreeze the waveform,
press the Run/Stop key
again. The Run/Stop key
turns green again and
acquisition resumes.
Run/Stop Run/Stop
Turn Off Menu
Panel Operation 1. Press the Menu Off key
below the side menu keys to
reduce a menu. The menu
key needs to be pressed
each time to reduce one
menu.
See page 35 for more
information.
Menu Off