5 warranty – IAI America PCON-CF User Manual
Page 33
15
1. Overview
1.5
Warranty
1.5.1 Warranty Period
One of the following periods, whichever is shorter:
18 months after shipment from our factory
12 months after delivery to a specified location
Our products are covered by warranty when all of the following conditions are met. Faulty products covered
(2) The breakdown or problem in question occurred during the warranty period.
(1) The breakdown or problem in question pertains to our product as delivered by us or our authorized dealer.
(3) The breakdown or problem in question occurred while the product was in use for an appropriate purpose
under the conditions and environment of use specified in the operation manual and catalog.
(4) The breakdown or problem in question was caused by a specification defect or problem, or by the poor
Note that breakdowns due to any of the following reasons are excluded from the scope of warranty:
by warranty will be replaced or repaired free of charge:
[2] Modification or repair performed by a party other than us (unless we have approved such
[3] Anything that could not be easily predicted with the level of science and technology available at the
time of shipment from our company
modification or repair)
[4] A natural disaster, man-made disaster, incident or accident for which we are not liable
[5] Natural fading of paint or other symptoms of agin
[6] Wear, depletion or other expected result of use
[7] Operation noise, vibration or other subjective sensation not affecting function or maintenance
Note that the warranty only covers our product as delivered and that any secondary loss arising from a
breakdown of our product is excluded from the scope of warranty.
1.5.3 Honoring the Warranty
1.5.2 Scope of Warranty
As a rule, the product must be brought to us for repair under warranty.
quality of our product.
1.5.4 Limited Liability
[1] We shall assume no liability for any special damage, consequential loss or passive loss such as a loss of
expected profit arising from or in connection with our product.
[2] We shall not be liable for any program or control method created by the customer to operate our product
or for the result of such program or control method.
[1] Anything other than our product