IAI America PCON-CF - Manual (Page 102)

84
6. Data Entry
(2) Removing the gripped work part
This gripper is designed to maintain the work part-gripping force via a self-lock mechanism even when the servo
is turned OFF or the controller power is cut off.
If the gripped work part must be removed while the power is cut off, do so by turning the open/close screw or
removing the finger attachment on one side.
[2-finger type]
Turn the open/close screw or remove the finger attachment on one side.
[3-finger type]
Remove one finger attachment.
(OP
E
N)
Open/close screw
Turn the screw counterclockwise
using a flathead screwdriver.
Finger attachment
Affixing bolt
Opening direction
Affixing bolt
Finger attachment