B&K Precision 9171-9174 - Manual - Manual (Page 97)

85
Ethernet (LAN)
Ethernet (LAN) option is available when the supply is installed with
the optional LAN/GPIB interface card. There are three ways to
control the power supply via LAN interface: Web server, Telnet
connection, Socket connection.
Web Server
There is an embedded web server GUI that can access the power
supply via LAN interface using a java enabled web browser. The
GUI provides a simple way of setting voltage and current, as well as
monitoring the output, using a web browser from a computer
connected to the same local area network as the power supply. To
access this, do the following:
1. On the computer, open up a java-enabled web browser.
2. From the power supply menu, copy down the
IP ADDRESS
that you or the server configured and type in that address in
the URL bar of your browser with
http:// prefix (i.e.
http://192.168.1.150 for IP Address 192.168.1.150)
3. If correctly configured, the following screen will be shown: