B&K Precision 9171-9174 - Manual - Manual (Page 78)

66
3.9 Output Protection
Configure OVP
Overvoltage protection (OVP) is available to limit the voltage output
and to protect a connected DUT from an overvoltage condition.
When the power supply trips the OVP, a short beep will sound and
the OVP (OVP1/OVP2 for dual channel models) LED indicator on
the front panel will be lit. The green output light will also disappear
and output will turn OFF (disable) immediately. To clear the OVP trip,
press any key and the OVP (OVP1/OVP2 for dual channel models)
LED indicator will turn OFF. To activate OVP, follow the steps below:
1. Press , then to enter PROTECTION, and press
to select OVP SETTING.
For Dual Channel models:
2. Press to select ON. Press to confirm the changes,
and use the numeric keypad to set the voltage limit for the
CH1 OVP = ON SET = 70.000 V
CH2 OVP = OFF SET = 70.000 V
OVP = ON SET = 70.000 V
Enter
Menu 3 1