B&K Precision XLN Series - Datasheet - Manual

Data Sheet
www.bkprecision.com Technical data subject to change
© B&K Precision Corp. 2013
The B&K Precision XLN series are programmable,
single-output DC power supplies, that provide
clean power up to 1560 watts in a compact 1U
rackmountable package. Comparable supplies
from other manufacturers primarily address the
ATE market only, while the XLN series is designed
for both benchtop users and system integrators.
For benchtop applications, these power supplies
offer built-in voltage and current meters
displaying setting and output values concurrently,
as well as an intuitive user interface with full
keypad and rotary knob.
Features & Benefits
■ Compact, high density, 1U package
■ USB interface (standard), GPIB and LAN
(optional)
■ External analog programming interface
■ List mode: execute test sequences with up to
150 steps from instrument memory
■ Average command processing time <50 ms
■ Programmable voltage and current slew rate
allow for "soft starting" of loads
■ Internal memory stores up to 10 instrument
settings
■ Control up to 30 power supplies from one
PC via the RS485 interface
■ Remote sense
■ Timer-controlled output (1 s to 100 hr)
■ Front to rear airflow allows for efficient cooling
in high rack density environments
■ Application software and LabVIEW™ drivers
available
■ SCPI-compliant command set
■ Extensive protection features: OVP, OCP, OPP,
OTP, foldback protection mode, and key-lock
function
■ Easy to configure master/slave mode for series
or parallel connection of up to four units
Standard USB, RS485, and optional GPIB and
LAN interfaces combined with fast average
command processing times of less than 50 ms
make the XLN series ideal for ATE applications.
Free application software and a complete set of
LabVIEW™ drivers are available to provide
remote control capabilities, reduce programming
time, and increase productivity.
When greater output power is required, up to
four XLN models can be connected in series
(high current models only) or parallel and
synchronized with the RS485 interface.
Alternatively, the RS485 interface can be used
to daisy chain up to 30 units and to remotely
control them from one master PC via USB, GPIB,
or LAN interface.
These power supplies are perfectly suited for
ATE systems integration, product design and
development, product QC and burn-in testing,
and other applications requiring excellent
regulation, high power, low noise, and a wide
range of voltage and current ratings.
Specifi cati ons XLN3 640 XLN6 024 XLN8 018 XLN1 00 14 XLN1 50 10 XLN3 00 52 XLN6 00 26
GPIB & LAN version XLN3640-GL XLN6024-GL XLN8018-GL XLN10014-GL XLN15010-GL XLN30052-GL XLN60026-GL
Output Voltage 0-36 V 0-60 V 0-80 V 0-100 V 5 -150 V 5 - 300 V 5 - 600 V
Output Current 0-40 A 0-24 A 0-18 A 0-14.4 A 0.04-10.4 A 0.02-5.2 A 0.01-2.6 A
Output Power 1440 W 1440 W 1440 W 1440 W 1560 W 1560 W 1560 W
Features
High Current
XLN Models
High Voltage
XLN Models
Auxiliary Output 5 V / 1 A -
Master/Slave Oper. Parallel/Series Parallel Only
Display resolution 1 mV/1 mA 10 mV/1 mA
Analog programming √ √
Analog monitoring - √
High Current High Voltage
New Family of High Density System Power Supplies
Programmable DC Power Supplies
XLN Series