B&K Precision 9171-9174 - Manual - Manual (Page 117)

105
OUTput:SR:VOLTage
Description: Configures/Queries the voltage slew rate in unit of
V/ms. For dual channel models, this will configure the
slew rate for channel 1.
Syntax: OUTput:SR:VOLTage
OUTput:SR:VOLTage?
- Voltage value. 0 – max. voltage slew rate
value. See “Slew Rate Configuration” in section 3.5.
Example: OUT:SR:VOLT 7.000
Sets the voltage slew rate to 7.000 V/ms
Query: OUT:SR:VOLT?
Return String: 7.000
Format:
OUTput:SR:VOLT2
Note: For dual channel models only.
Description: Configures/Queries the voltage slew rate for channel 2.
Syntax: OUTput:SR:VOLT2
OUTput:SR:VOLT2?
- Voltage value. 0 – max. voltage slew rate
value. See “Slew Rate Configuration” in section 3.5.
Example: OUT:SR:VOLT2 7.000
Sets the voltage slew rate to 7.000 V/ms
Query: OUT:SR:VOLT2?
Return String: 7.000
Format:
OUTput:SR:CURRent
Description: Configures/Queries the current slew rate in unit of A/ms.
For dual channel models, this will configure the slew
rate for channel 1.
Syntax: OUTput:SR:CURRent
OUTput:SR:CURRent?
- Current value. 0 – max. current slew rate
value. See “Slew Rate Configuration” in section 3.5.
Example: OUT:SR:CURR 1.000