B&K Precision 9171-9174 - Manual - Manual (Page 111)

99
The measured current is 1.234 V.
Format:
Memory Subsystem
MEMory
Description: Selects the memory location/Returns the selected
memory location.
Syntax: MEMory
- Memory location. 0 – 9 are valid.
Example: MEM 2
Selects memory location 2.
Query: MEM?
Return String: 8
Currently selected memory location is 8.
Format:
MEMory:VSET
Description: Configures/Queries the voltage value to store at the
selected memory location (use “MEM” command to
select memory location first)
Syntax: MEMory:VSET
- Voltage value. 0 – max. rated voltage
value are valid.
Example: MEM:VSET 4.132
Sets 4.132 V as voltage for the selected memory
location.
Query: MEM:VSET?
Return String: 4.132
Voltage is currently set to 4.132 V in the selected
memory location.
Format:
MEMory:VSET2
Note: For dual channel models only.
Description: Configures/Queries the second channel voltage value
to store at the selected memory location (use “MEM”
command to select memory location first)
Syntax: MEMory:VSET2