B&K Precision 9171-9174 - Manual - Manual (Page 128)

116
[SOURce]:CURR2:PROTection
Note: See PROTection:OCP2 command.
[SOURce]:CURR2:PROTection:LEVel
Note: See PROTection:OCP2:LEVel command.
[SOURce]:VOLTage
Description: Configures/Queries the VSET voltage setting. For dual
channel models, use [SOURce]:VOLT2 command for
channel 2.
Syntax: [SOURce]:VOLTage
[SOURce]:VOLTage?
- 0 – max. rated voltage.
Example: SOUR:VOLT20.000
Set voltage to 20.000 V.
Query: SOUR:VOLT?
Return String: 20.000
Format:
[SOURce]:VOLTage:PROTection
Note: See PROTection:OVP command.
[SOURce]:VOLTage:PROTection:LEVel
Note: See PROTection:OVP:LEVel command.
[SOURce]:VOLTage:RANGe
Note: This command is for models 9184 and 9185 only.
Description: Configures/Queries the voltage range.
Syntax: [SOURce]:VOLTage:RANGe
[SOURce]:VOLTage:RANGe?
- 0 or 1 / LOW or HIGH
Example: SOUR:VOLT:RANG LOW
SOUR:VOLT:RANG 0
Set the supply to the low voltage range.
Query: SOUR:VOLT:RANG?
Return String: LOW
Format: