B&K Precision 9171-9174 - Manual - Manual (Page 141)

129
OUT/OUT2
Note: OUT2 command is for dual channel models only.
Description: Configures/Queries the output state. For dual channel
models, use OUT2 command to configure/query
channel 2 output state.
Syntax: OUT
OUT2
OUT?
OUT2?
- ON or 1 to turn ON
- OFF or 0 to turn OFF
Example: OUT 1
Turns ON (enables) the output
Query: OUT?
OUT2?
Return String: ON
Output is enabled.
Format:
OUTM/OUTM?
Note: This command is for dual channel models only.
Description: Configures/Queries the output mode for multi or single
output control for dual channel models.
Syntax: OUTM
OUTM?
- SINGLE or 1 for single channel output
control
- MULTI or 0 for dual channel output control
(control both channels’ output state
simultaneously)
Example: OUTM 1
Sets the output mode to SINGLE
Query: OUTM?
Return String: SINGLE
Format: