B&K Precision 9171-9174 - Manual - Manual (Page 170)

158
7 Calibration
Access Calibration Menu
Follow the steps below to access the calibration menu.
1. Press , then to enter CALIBRATION. The
following screen will be displayed:
2. Enter the password: 13579 with the numeric keypad.
3. There will be two options. 1. CURRENT CALIBRATION,
and 2. VOLTAGE CALIBRATION, as shown in the screen
below. A third option 3. EXT. INPUT CALIB is available if
the supply has an optional DIO/Analog Interface Card
installed.
1. CURRENT CALIBRATION
2. VOLTAGE CALIBRATION
PLEASE KEYIN PASSWORD : _
Menu 7