B&K Precision 9171-9174 - Manual - Manual (Page 40)

28
3 Front Panel Operation
3.1 Menu Options
All settings and parameters can be configured from the built-in menu
system of the power supply. To access the menu, press .
The menu system is divided into 8 categories and organized as
follows:
1. SYSTEM SETTING
• REMOTE(USB,ETHERNET,GPIB,RS232 (optional))
• GPIB ADDR(1-30)
• KEY LOCK(ON,OFF)
• IP CONFIG(STATIC)
• IP ADDRESS(xxx.xxx.xxx.xxx, where x = 0-9)
• BEEP(ON,OFF)
• LCD BACKLIT(ALWAYS ON, 1,5,10,30 MINS OFF)
• RECALL DEFAULT(NO,YES)
• POWER ON STATE (OFF,LAST)
• OUTPUT MODE (MULTI,SINGLE)*
• TRACKING MODE (ON,OFF)*
• EXTERN CONTROL (VOLT,RES,OFF) (optional)
• EXTERN LEVEL (5V,10V) (optional)
• EXTERN TRIG (ON,OFF) (optional)
2. OUTPUT SETTING
1. VOLT LIMIT SETTING
• VOLT LIMIT MAX (0 – Max. Voltage)
• VOLT LIMIT MIN (0 – Max. Voltage)
2. CURR LIMIT SETTING
• CURR LIMIT MAX (0 – Max. Current)
• CURR LIMIT MIN (0 – Max. Current)
3. VOLT SLEWRATE SETTING
• V SLEWRATE
4. CURR SLEWRATE SETTING
• I SLEWRATE
5. MEASURE AVERAGE(1-10)
6. LED MODE SETTING
• LED MODE (ON,OFF)
Menu