B&K Precision 9171-9174 - Manual User Manual
Page 159
147
GRST
Description:
Resets all the power supplies connected in the chain to
a known state.
Syntax:
GRST
GCLS
Description:
Clears the status of all the power supplies connected in
the chain.
Syntax:
GCLS
GCLR
Description:
Clears the protection flag/trip of all the power supplies
connected in the chain.
Syntax:
GCLR
GPV/GPV2
Description:
Configures/Queries the VSET voltage setting of all the
power supplies connected in the chain. See
VOLTage/VOLT2 command for similar syntax. GPV2 is
for dual channel models only.
Example:
GPV 15.698
Sets all the power supplies’ VSET voltage setting to
15.698 V.
GPC/GPC2
Description:
Configures/Queries the ISET current setting of all the
power supplies connected in the chain. See
CURRent/CURR2 command for similar syntax. GPC2
is for dual channel models only.
Example:
GPC 3.123
Sets all the power supplies’ ISET current setting to
3.123 A.