B&K Precision 9171-9174 - Manual - Manual (Page 80)

68
For Dual Channel models:
2. Press to select ON. Press to confirm the changes,
and use the numeric keypad to set the current limit for the
protection to trip. Press again to save changes. When
the power supply current output reaches this limit, the OCP
will trip.
3. Press twice to exit the menu. To disable it, select
OFF.
3.10 Save/Recall Output Settings
The power supply has internal memory to store up to 10 settings,
and each setting includes the set voltage (VSET) and set current
(ISET) values.
Save Output Settings
Follow these steps to save settings:
1. Press , then to enter MEMORY SETTING. The
following screen will bedisplayed:
CH1 OCP = ON SET = 10.000 A
CH2 OCP = OFF SET = 10.000 A
Enter
Esc
Enter
Menu 4