B&K Precision 9171-9174 - Manual - Manual (Page 41)

29
• Low Current Mode (ON,OFF)**
3. PROTECTION
1. OVP SETTING
• OVP (ON,OFF)
• SET (0 – Max. Voltage)
2. OCP SETTING
• OCP (ON,OFF)
• SET (0 – Max. Current)
4. MEMORY SETTING(0-9)
5. PROGRAM MODE
6. TIMER FUNCTION
• TIMER (ON,OFF)
• TIME (hr:min:sec)
7. CALIBRATION
8. INFORMATION
9. CHAIN SETTING (optional)
• CHAIN ON/OFF (ON,OFF)
• CHAIN ADDRESS(1-31)
*Dual channel models 9173 and 9174 only.
**Models 9184 and 9185 only.
Note: All optional menu items appear only when their respective optional
interface cards are installed inside the power supply.
How to Access the Menu
Before using the instrument, it is important to be familiarized with its
menu structure and how to view or change settings and parameters.
Follow the steps below to guide you in selecting menu options.
Note: The menu cannot be accessed when the output(s) is turned ON or
when it is in remote mode (indicated by RMT light).