B&K Precision 9171-9174 - Manual - Manual (Page 100)

88
Telnet Connection
The power supply can be connected via Ethernet (LAN) interface
using Telnet client with the following port:
Telnet Port: 5024
Windows XP Users
1. Open a command prompt window, which can be found by
going to Start > All Programs > Accessories > Command
Prompt. Alternatively, you can click on Start, select Run…,
and type in
cmd in the Open: input box. Click OK to open
Command Prompt.
2. At the prompt, type in Telnet5024
where:
is a space.
is the IP address you have configured for the
power supply.(see “Ethernet (LAN) Interface” for details)
Example: Telnet 192.168.1.150 5024
3. The following screen will be displayed, and users can enter
remote commands at the prompt, such as *IDN?.