B&K Precision 9171-9174 - Manual User Manual
Page 123
111
PROGram:STEP:VOLTage
Description:
Configures/Queries the voltage setting for the selected
step (use PROGram:STEP command to select step).
For dual channel models, this will be for channel 1.
Syntax:
PROGram:STEP:VOLTage
PROGram:STEP:VOLTage?
Example:
PROG:STEP:VOLT 1.234
Set 1.234 V as voltage setting for the selected step in
the program sequence.
Query:
PROG:STEP:VOLT?
Return String:
1.234
Format:
PROGram:STEP:VOLT2
Note:
For dual channel models only.
Description:
Configures/Queries the voltage setting for the selected
step (use PROGram:STEP command to select step) for
channel 2.
Syntax:
PROGram:STEP:VOLT2
PROGram:STEP:VOLT2?
Example:
PROG:STEP:VOLT2 1.234
Set 1.234 V as voltage setting for the selected step in
the program sequence.
Query:
PROG:STEP:VOLT2?
Return String:
1.234
Format:
PROGram:TOTAl
Description:
Configures/Queries the total number of step numbers
for the program sequence.
Syntax:
PROGram:TOTAl
PROGram:TOTAl?
Example:
PROG:TOTA 100
Setup a program sequence with 100 steps.
Query:
PROG:TOTA?
Return String:
30
Currently the sequence will have 30 steps for setup.
Format: