B&K Precision 9171-9174 - Manual - Manual (Page 164)

152
Remote Control
Q: I am trying to send the commands over USB/RS232, but it
does not seem to respond.
- Check that you are sending ASCII strings that are terminated
with a CR (carriage return) and LF (linefeed) character.
- For USB, check that the correct USB drivers are installed and
that you are communicating with the right COM port, which can
be verified under “Device Manager” in Windows.
- For USB and RS232, be sure to use 57600 baudrate, no parity,
8 data bits, 1 stop bit, no flow control setting.
Q: Can I use RS485 to control multiple power supplies instead
of via USB if my PC has an RS485 interface port?
- Yes. Please contact B&K Precision for details.