B&K Precision 9171-9174 - Manual - Manual (Page 140)

128
OCP/OCP2
Note: OCP2 command is for dual channel models only.
Description: Configures/Queries the over current protection state.
For dual channel models, use OCP2 command for
channel 2.
Syntax: OCP
OCP2
OCP?
OCP2?
- ON or 1 to turn ON
- OFF or 0 to turn OFF
Example: OCP2 ON
Enables OCP for channel 2 on a dual channel model.
Query: OCP?
OCP2?
Return String: OFF
Format:
OISET/OISET2
Note: OISET2 command is for dual channel models only.
Description: Configures/Queries the over current protection value.
For dual channel models, use OISET2 command for
channel 2.
Syntax: OISET
OISET2
OISET?
OISET2?
- 0 – max. rated current
Example: OISET 9.124
Sets OCP protection to 9.124 A .
Query: OISET?
OISET2?
Return String: 9.124
OCP is set to 9.124 A.
Format: