B&K Precision 9171-9174 - Manual - Manual (Page 77)

65
2. Press to select ON, then press to confirm the
changes. Press twice to exit the menu.
Consider the following example screenshots measuring a voltage
chance from 0 V to 60 V with a load of 100 mA connected to the
output.
When operating with low current output, enabling Low Current mode
can reduce the voltage rise time upon a change in the voltage output.
Low Current Mode OFF Low Current Mode ON
20 ms
5 ms
LED MODE = OFF
Low Current MODE = ON
Figure 22 - Inrush Current With and Without Low Current Mode Enabled
Enter
Esc