B&K Precision 9171-9174 - Manual - Manual (Page 63)

51
LIMIT MAX and VOLT LIMIT MIN settings if you are
unable to set a voltage within the specifications of the
power supply.
Slew Rate Configuration
Voltage and current slew rate of the output can be configured by
doing the following:
1. Press , then to enter OUTPUT SETTING. Press
to select VOLT SLEWRATE SETTING. The following will be
displayed:
For Dual Channel models:
2. Use the keypad to enter the voltage slew rate. (Refer to
Table 4) Then press the save the changes.
3. Press once to return to the previous menu items, and
press to select CURR SLEWRATE SETTING. The
following will be displayed:
CH1 V SLEWRATE = _ 7.000 V / ms
CH2 V SLEWRATE = _ 7.000 V / ms
V SLEWRATE = _ 7.000 V / ms
Menu 2 3
Enter
Esc
4