EVS IPDirector Version 6.0 - November 2012 Part 8 User's Manual - Manual (Page 53)

2. Click OK.
The values defined in the loaded template are applied.
How to Delete a Template
To delete an audio monitoring template from the Audio Output Channels window, proceed
as follows:
1. In the Template area, select the template that you want to delete from the list of
available templates.
2. Click Remove.
3. Click Yes to confirm that you want to delete the selected template.
The values defined in the loaded template are deleted.
5.9. Loading Media onto the Player
5.9.1. General Information
Prerequisite
To be able to load a clip, record train or log onto the Player, you first need to assign a pair
of player channels, i.e. a timeline engine, to IPEdit. This will automatically assign the
second player channel to the Player. See section "Assigning Player Channels to IPEdit"
on page 6 for more information.
Loadable Media
The following media can be loaded to the Player:
• A clip that contains at least a hi-res clip element (local or distant) present on a server.
• A growing clip that contains at least a hi-res clip element (local or distant) which
material is partially available on a server.
• A hi-res record train (local or distant) present on a server.
• A log: When a log is dragged to the Player, this loads either the protect media clip or
the associated record train (if still available on the server).
Limitations
If the Player is being used or if the IPEdit panel is locked, the user will not be able to load
media into the Player.
IPDirector - Version 6.00 - User Manual - IPEdit
5. Player 41