EVS IPDirector Version 6.0 - November 2012 Part 8 User's Manual - Manual (Page 138)

6.8.7. How to Extend OUT or Extend OUT Slow/Fast
a Timeline Element
To extend the mark OUT point of a timeline element, perform as follows:
1. With the Timeline Track Selection buttons, select the tracks to be taken into
account in the Extend action.
2. Select the Insert or Overwrite mode to be applied in the extend action by
clicking the Insert/Overwrite Global Mode button.
3. In the timeline loaded, click to add a mark OUT point after the transition of the
elements whose OUT point you want to extend.
Define precisely the position of the mark OUT point: IPEdit will indeed calculate the
duration of the extend based on the duration between:
◦ the transition of the element to extend
and
◦ the mark OUT point added.
4. Do one of the following:
◦ Click the Extend button to perform the Extend action.
◦ Click the Extend Slow/Fast Button to perform the Extend Slow/Fast
action.
The Extend or the Extend Slow/Fast action is performed according to the defined settings:
• on the selected tracks
• in the selected Insert or Overwrite mode
• on the elements before which the mark OUT point has been added
• with the duration between the element transition and the mark OUT point.
Note
When you place a mark IN and mark OUT before using the Extend function,
IPEdit will ask you which extend action you want to perform.
126 6. Timeline
EVS Broadcast Equipment S.A. - November 2012 Issue 6.00.A