EVS IPDirector Version 6.0 - November 2012 Part 8 User's Manual - Manual (Page 147)

Trim Left in Insert Mode
Principle
In a trim left performed in Insert mode, the OUT point of an element is shifted to the right
(i.e. element extended) or to the left (i.e. element trimmed) in the available A/V material,
without impacting what follows in the timeline.
Example: Shift to the left
The following example shows a trim left in Insert mode where the element is trimmed. The
following timeline element remains unchanged after the trim action.
Before the trim action
During the trim action
IPDirector - Version 6.00 - User Manual - IPEdit
6. Timeline 135