EVS IPDirector Version 6.0 - November 2012 Part 8 User's Manual - Manual (Page 175)

In the Transition Effect group box of the Add/Modify Transition Effect window, you can
modify these default settings by specifying another type, duration and/or position for the
transition effects to be added:
When you first access the window in a session, the default value defined in the Timeline
settings is displayed. Then, the last value used is restored each time you open the
window.
Field Description
The following table provides a short description of the fields:
Field Description
Type Effect type that will be applied to the selected transitions.
The possible values are:
• Cut
• Mix
• Wipe
If you select 'wipe', you need to select the kind of wipe you want to perform
in the drop-down list:
• Wipe L -> R: wipe from left to right
• Wipe R -> L: wipe from right to left
• Wipe U -> D: wipe from top to bottom
• Wipe D -> U: wipe from bottom to top.
When the wipe effect is defined, it is applied to the video track and a mix is
automatically defined on the selected audio tracks.
Duration Duration of the effect that will be applied to the selected transitions. The
duration is defined in frames must fulfill the following conditions:
• Even number
• Minimum of 3 frames
• Maximum recalculated based on the transition selection
Position Position of the effect in relation to the transition.
The possible values are:
• Before cut: before the transition
• Centered: centered on the transition
• After cut: after the transition
IPDirector - Version 6.00 - User Manual - IPEdit
6. Timeline 163