EVS IPDirector Version 6.0 - November 2012 Part 8 User's Manual - Manual (Page 186)

Swap/Mute Function
The swap function makes it possible to change the source audio channel to be played on a
given output audio channel, for example to play the source channel a4 onto the output
channel a6.
The mute function makes it possible to mute the content of an audio channel or track.
The swap and mute functions can be defined:
• on one or several elements of an audio track
• from the nowline position up to the end of the element where it is placed
• on a part of a track, from a mark IN point to a mark OUT point placed on the track.
Note
No swap or mute can be added or modified on timeline elements whose speed is
different than 100%. However, swaps or mutes can be deleted on such
elements.
174 6. Timeline
EVS Broadcast Equipment S.A. - November 2012 Issue 6.00.A