EVS IPDirector Version 6.0 - November 2012 Part 8 User's Manual - Manual (Page 167)

◦ to slide the element 1 frame to the right.
◦ to slide the element 10 frames to the right.
When you release the key, the slide action is applied within 1 sec.
4. Click anywhere in the Lasso Selection area to leave the slide mode.
6.11.5. How to Slide an Element Using the
ShuttlePRO
To slide one or more elements of the same source media using the ShuttlePRO, proceed
as follows:
1. Activate the slide mode on the requested elements by lassoing the whole elements
from right to left, keeping the CTRL key pressed.
See section "Activating and Deactivating the Slide Mode" on page 152.
->
2. Click the requested Timeline Track Selection buttons to select or unselect the
tracks you want or do not want to slide.
3. Rotate the jog to the left or to the right to slide the elements respectively to the left or
to the right.
When you stop turning the jog, the slide action is applied within 1 sec.
4. Click anywhere in the Lasso Selection area to leave the slide mode.
6.12. Transition Effects
6.12.1. Introduction
Principles and Limitations
In IPEdit, the transition effects follow the principles below:
• Effects can be added on the transitions of the audio and video elements of any
timeline track.
• They can be heard and seen when browsing the timeline.
IPDirector - Version 6.00 - User Manual - IPEdit
6. Timeline 155