EVS IPDirector Version 6.0 - November 2012 Part 8 User's Manual - Manual (Page 52)

2. On the right line, click the cell corresponding to the channel you want to associate to
the right ear.
5.8.5. Saving the Audio Monitoring Parameters in a
Template
Where?
In the Templates area, you can save the values assigned to the Input Gain and Audio
Channels parameters in a template, and reload them later on when necessary.
How to Create a Template
To create a template of the audio monitoring parameters from the Audio Output Channels
window, proceed as follows:
1. Define the values for the Input Gain and Audio Channels parameters in the Audio
Output Channels window.
2. Type a name for the template in the Name field of the Template area.
3. Click Add.
When you click OK, the values defined in the template you have just created are applied.
If you want to apply different values, you need to modify them before leaving the window
or to load another existing template.
How to Load a Template
To load an audio monitoring template from the Audio Output Channels window, proceed
as follows:
1. In the Template area, select the template that you want to load from the list of
available templates.
40 5. Player
EVS Broadcast Equipment S.A. - November 2012 Issue 6.00.A