EVS IPDirector Version 6.0 - November 2012 Part 8 User's Manual - Manual (Page 208)

6.14.5. How to Change the Graphic Volume Range
In order to … Click one or more times …
increase the graphic
volume range above the 0
db line, the upper arrow in the MaximumGraphic Volume Range
spin box
until the requested value for the range is displayed
decrease the graphic
volume range above the 0
db line, the lower arrow in the MaximumGraphic Volume Range
spin box until the requested value for the range is
displayed.
increase the graphic
volume range below the 0
db line, the upper arrow in the MinimumGraphic Volume Range
spin box
until the requested value for the range is displayed.
decrease the graphic
volume range below the 0
db line, the lower arrow in the MinimumGraphic Volume Range
spin box until the requested value for the range is
displayed.
6.14.6. Preliminary Actions Before Any Increase or
Decrease on the Volume Automation Curve
Before you increase or decrease the volume automation curve, go through the following
steps:
Loading the Track in the Volume Automation Panel
To enter the volume automation mode and load the track in the Volume Automation panel,
click the Volume Automation Mode button next to the track where you want to
increase or decrease the volume.
Adapting the Graphic Volume Range
You need to ensure that the graphic volume range displayed allows you to perform the
increase or decrease action you want to.
196 6. Timeline
EVS Broadcast Equipment S.A. - November 2012 Issue 6.00.A