EVS IPDirector Version 6.0 - November 2012 Part 8 User's Manual - Manual (Page 141)

6.9.2. Overview of Trim Modes and Trim Actions
The following table gives an overview of the possible trim actions. You can find more
detailed information on trim actions in "Possible Trim Actions" on page 133.
Trim Action Description
Trim Left & Right
- Roll mode:
The transition between both elements in trim mode is moved left
or right within each element but the overall length of both
elements is preserved:
• The duration of each individual element is modified.
• One element is extended, one element is trimmed.
Trim Left Insert
- Ripple A mode:
The OUT transition of the element in trim mode is moved to the
right or to the left:
• The element is extended or trimmed around its OUT point.
• This does not impact the next element in the timeline.
Trim Left Overwrite
- Ripple A mode:
The OUT transition of the element in trim mode is moved to the
right or to the left:
• The element is extended or trimmed around its OUT point.
• If the element is trimmed, a blank element is added after it.
• If the element is extended, the following element is trimmed
at its IN point.
Trim Right Insert
- Ripple B mode:
The IN transition of the element in trim mode is moved to the
right or to the left:
• The element is extended or trimmed around its IN point.
• This does not impact the previous element in the timeline.
Trim Right Overwrite
- Ripple B mode:
The IN transition of the element in trim mode is moved to the
right or to the left:
• The element is extended or trimmed around its IN point.
• If the element is trimmed, a blank element is added before it.
• If the element is extended, the previous element is trimmed
at its OUT point.
IPDirector - Version 6.00 - User Manual - IPEdit
6. Timeline 129