EVS IPDirector Version 6.0 - November 2012 Part 8 User's Manual - Manual (Page 174)

Where are the Transition Effects Applied?
Elements from the Same Media Source
By default, the transition effects defined manually in the Add/Modify Transition Effect
window are applied to the selected tracks and to the elements which are the closest to the
nowline.
Contiguous Elements from Different Media Sources
If you want to apply the transition effects to several contiguous transitions, you need to
place mark IN and mark OUT points to cover all the transitions on which to apply the
transitions effects and select the option Apply to all transitions between mark IN and
mark OUT.
Note
By default, the pre-existing transition effects will be preserved when you define
new transition effects between mark IN and a mark OUT points. However, you
can overwrite the pre-existing transition effects by selecting the option
Overwrite existing transitions effects when you define the new effects.
Tracks Group Box
The Tracks group box in the Add/Modify Transition Effects window allows you
to select the tracks on which the defined transitions effects will be added in the
timeline. The effects will only be added to the tracks whose buttons are
highlighted in blue. The selection in this group box is reflected in the Timeline
Track Selection and vice versa.
For a quick selection from the keyboard, you can use the same keyboard
shortcuts as for the track selection in the Timeline pane. See section "Timeline
Track Selection Buttons" on page 63.
Transition Effect Group Box
Default Settings and Settings Defined in this Group Box
You can define default settings for the transition effects applied manually via the
Add/Modify Transition Effect window. These settings are defined in the Tools > Settings
menu, in the category IPEdit > General, Transition Effects group box, Manual mode.
162 6. Timeline
EVS Broadcast Equipment S.A. - November 2012 Issue 6.00.A