Manual swap definition in the swap/mute zoom mode, Description, How to define a swap/mute in swap/mute zoom mode – EVS IPDirector Version 6.0 - November 2012 Part 8 User's Manual User Manual

Page 194

6.13.6. Manual Swap Definition in the Swap/Mute

Zoom Mode

Description

You can swap one or more channels of an audio track and apply the swap to these
channels from a point to another point of the audio track. You will specify the start and end
points as follows:

•

with a mark IN on the start point and a mark OUT on the end point.

•

with the nowline on the start point. In this case, the swap is applied up to the end of
the element where the nowline is positioned.

How to Define a Swap/Mute in Swap/Mute Zoom
Mode

You can define such a swap in the Swap/Mute Zoom mode.

To do so, proceed as follows:

1. Click the Swap/Mute Zoom Mode button

to access the Swap/Mute Zoom

mode.

Depending on the audio configuration of the output channels, an audio track may
contain up to 16 channels. In Swap/Mute Zoom mode, the audio track shows a
number of lines reflecting the number of audio mono channels.

Example of a 16-channels track:

182

6. Timeline

EVS Broadcast Equipment S.A. - November 2012

Issue 6.00.A