EVS IPDirector Version 6.0 - November 2012 Part 8 User's Manual - Manual (Page 229)

1. In the Timeline Track Selection buttons, activate the buttons of the tracks on which
the Replace process will be performed.
2. Set a mark IN point and, if requested, a mark OUT point to delimit the part of the
timeline to be replaced. You can also stop the process manually.
3. To start the Create Clip From Timeline process, click the button.
The Save Clip window opens:
◦ Fill in the window with the requested clip information, as described in the Control
Panel user manual .
◦ Tick the Replace in Timeline check box if you want the consolidated A/V
material to be replaced in the timeline.
4. The nowline is automatically positioned on the mark IN point. If a pre-roll is defined,
the nowline is positioned on the mark IN minus the pre-roll duration.
As the Replace process takes place, the nowline moves to the right and the area
already replaced is displayed on an orange background:
5. The Create Clip From Timeline process is stopped in one of the following ways:
◦ Automatically: you have defined a mark OUT and the process will be stopped
when it reaches the mark OUT.
◦ Manually: click again the button to stop the process.
◦ End of timeline: If the process is not stopped automatically or manually, it will be
stopped when the record reaches the end of the timeline.
Two seconds after the end of the Create Clip from Timeline process, the replaced part of
the A/V material is available in the timeline (if you have checked the Replace in Timeline
check box in step 3), the consolidated clip is available in the Browser and you can play it.
6.15.7. How to use the Live to Tape Function
Before you can use the Live to Tape function, ensure that a recorder is assigned to IPEdit
and the desired Preroll value is defined in the Replace settings. See sections "Assigning a
Recorder Channel to IPEdit" on page 206 and "Replace Settings" on page 207.
To replace a part of a timeline, proceed as follows:
1. Set a mark IN point.
IPDirector - Version 6.00 - User Manual - IPEdit
6. Timeline 217