EVS IPDirector Version 6.0 - November 2012 Part 8 User's Manual - Manual (Page 212)

6.14.9. Modifying the Volume on a Given Position of a
Track
How to Modify the Volume on a Given Position of a
Track
To modify the volume on a given point of a track, proceed as follows:
1. On the Volume Automation panel, double-click the position where you want to add a
volume automation point.
The point is added.
2. If you need to adjust the volume or the position of the point, select it again and drag it
up or down, right or left according to your needs.
The decibel increase or decrease compared to the 0 db line is specified as you move
the volume automation point.
3. When the volume automation point is correctly positioned, release the mouse.
Example: Add a Volume Automation Point
Before
200 6. Timeline
EVS Broadcast Equipment S.A. - November 2012 Issue 6.00.A