EVS IPDirector Version 6.0 - November 2012 Part 8 User's Manual - Manual (Page 104)

This selection is used in combination with the Replace by command to replace all
selected clips by another camera angle.
The selection based on the recorded camera angle is done according to the following
rules:
• Only elements on the activated A/V tracks will be selected.
• Only elements recorded on the selected camera will be selected.
• If mark IN and mark OUT points are defined, only relevant elements between the
marks are taken into account for the selection.
• If no mark IN/OUT are defined, all relevant elements on the selected tracks are taken
into account for the selection.
6.5. Placing Media in the Timeline
6.5.1. Applicable Principles
Introduction
The following principles are applicable when you want to place media in the timeline.
92 6. Timeline
EVS Broadcast Equipment S.A. - November 2012 Issue 6.00.A