Possible element selections and move types, Possible selections and moves, Magnet effect – EVS IPDirector Version 6.0 - November 2012 Part 8 User's Manual User Manual
Page 127: Possible element selections

•
The elements initially positioned on the right of the moved element are shifted to the
left to fill the gap of the moved elements.
When you perform a move action in Overwrite mode:
•
The A/V material where you move the selected elements to is overwritten.
•
The initial position of the elements is left empty.
Possible Selections and Moves
Not all moves are possible. Whether a move is allowed or not depends on:
•
which elements are selected for the move action
•
where the selected elements are moved to.
Before explaining how a move is performed, see section "Possible Element Selections
and Move Types" on page 115 for a description on which element selections and which
types of moves are possible.
Magnet Effect
By default, a magnet effect allows the selected element(s) to be moved to a transition or
to the nowline. However, you can deactivate this magnet effect by pressing CTRL on the
keyboard while moving the elements.
6.7.2.
Possible Element Selections and Move Types
Possible Element Selections
The methods for selecting elements before moving them are the ones explained in
"Selecting and Deselecting Timeline Elements" on page 90.
You can move the following elements or group of elements:
IPDirector - Version 6.00 - User Manual - IPEdit
6. Timeline
115