EVS IPDirector Version 6.0 - November 2012 Part 8 User's Manual - Manual (Page 164)

Final Situation
The position of the slid element in the timeline has been shifted to the right. However, the
IN and OUT point of the slid elements have not changed.
The element before the slid element has been lengthened: its TC OUT has changed from
09:49:09:18 to 09:49:11:13.
The element after the slid element has been reduced: its TC IN has changed from
09:49:39:17 to 09:49:41:12.
6.11.2. Activating and Deactivating the Slide Mode
How to Activate the Slide Mode
You can only activate the slide mode on one or more elements of the same source media.
To activate the slide mode on one or more elements of the timeline, proceed as follows:
1. Click the left mouse button in the upper or lower Lasso Selection area after the
elements on which to activate the slip mode.
2. Keeping the mouse button pressed and pressing CTRL simultaneously, drag the
mouse from right to left over the tracks that you want to select.
OR
The slide mode is activated on the tracks that are completely lassoed.
The elements on which the slide mode is active have yellow vertical bars displayed
outside the element, close to the transitions:
152 6. Timeline
EVS Broadcast Equipment S.A. - November 2012 Issue 6.00.A