EVS IPDirector Version 6.0 - November 2012 Part 8 User's Manual - Manual (Page 45)

5.6.3. Overwrite Function
User Interface Button Keyboard Shortcut ShuttlePRO key
The Overwrite function adds the media in the timeline, overwriting the media already
included in the timeline from the selected position. In other words, the media in the
timeline will be removed by the duration of the added media.
5.6.4. Marking the Media to be Added to the Timeline
The portion of media added to the timeline depends on the IN and OUT points, or on
possible new mark IN and mark OUT points defined:
• If the user adds a clip element to the timeline without defining a new mark IN and new
mark OUT points to the clip loaded in the Player, the clip is added to the timeline from
its original IN point to its original OUT point.
• If the user adds a clip to the timeline after having defined a mark IN and/or a mark
OUT point to the clip loaded in the Player, the clip will be added to the timeline from
the mark IN point to the mark OUT point, if both are defined.
If one of both Mark points has not been defined in the Player, the original IN or OUT
point of the clip will be taken into account.
Note
The guardbands of the clip remain available for further editing once the element
has been added to the timeline.
See section "Position Applied to the Timeline Element" on page 100 for full information on
how and where the media loaded and marked on the Player is added to a timeline.
5.6.5. Match Frame Replace
User Interface Button Keyboard Shortcut
IPDirector - Version 6.00 - User Manual - IPEdit
5. Player 33