beautypg.com

How to create a clip based on the loaded media, Timecode fields display – EVS IPDirector Version 6.0 - November 2012 Part 8 User's Manual User Manual

Page 43

background image

When a clip is loaded, all time information fields are filled.

When a growing clip is loaded, only the IN field is filled in. The Duration field and the
OUT field display --:--:--:--.

When a train is loaded, no time information is displayed.

As soon as an IN point is marked, the IN field is filled in; as soon as an OUT point is
marked, the Duration and the OUT information are displayed.

Timecode Fields Display

Information displayed in the Time Information fields can be changed as follows:

1. Right-click the Timecode field.

The following contextual menu is displayed:

Timecode

Timecode and date

2. Select one of the options.

5.5.3.

How to Create a Clip Based on the Loaded
Media

By double-clicking the media in the Browser, you will load the media to the Player.

To create a clip based on the loaded media, proceed as follows:

1. Browse through media to select the point to be marked IN.

2. Create an IN point in one of the following ways:

Use the clip creation function to set an IN point at the required timecode.

Enter the timecode of the requested IN point in the IN field and press ENTER.

The IN point is set:

3. Create an OUT point in one of the following ways:

Use the clip creation function to set an OUT point at the required timecode

Enter the timecode of the requested OUT point in the OUT field and press
ENTER.

The OUT point is set:

The clip duration is displayed in the Duration field.

IPDirector - Version 6.00 - User Manual - IPEdit

5. Player

31