EVS IPDirector Version 6.0 - November 2012 Part 8 User's Manual - Manual (Page 148)

After the trim action
Trim Left in Overwrite Mode
Principle
In a trim left performed in Overwrite mode, the OUT point of an element is shifted to the
right (i.e. element extended) or to the left (i.e. element trimmed), impacting what follows in
the timeline:
• When the OUT point of the element is shifted to the right, the next element is reduced
by an equivalent duration.
• When the OUT point of the element is shifted to the left, a blank of an equivalent
duration is added after the trimmed element.
Example: Shift to the right
The following example shows a trim left in Overwrite mode where the element is
extended. The following element is trimmed by the same duration at its IN point.
Before the trim action
136 6. Timeline
EVS Broadcast Equipment S.A. - November 2012 Issue 6.00.A