EVS IPDirector Version 6.0 - November 2012 Part 8 User's Manual - Manual (Page 238)

If you move the timeline element to which the GPI is associated, the locator will move
with the clip.
GPI Display
When the GPI Selection button is disabled, the GPIs are 'not active': they are displayed
in grey on the Timecode bar:
You need to click the GPI Selection button (above the Timeline Track Selection
buttons) to allow the GPI selection.
When the GPI selection is enabled, the marker for a clip GPI is grey and the letter
corresponding to the track on which it is defined is displayed on the marker:
When you select only the track on which the GPI is defined, the GPI turns purple:
The GPI settings will display after one second when you position the mouse cursor on the
GPI marker:
How to Select/Deselect a Clip GPI
To select a clip GPI, proceed as follows:
1. In the timeline track selection, select the track on which the clip GPI is defined. The
grey GPI turns purple.
2. Click the mouse in the Lasso Selection area and drag the mouse cover the clip GPI
marker:
When you release the mouse key, the clip GPI is selected and the marker is surrounded
by a white border .
To deselect a clip GPI, simply click in the Lasso Selection area. The white border around
the GPI disappears.
226 6. Timeline
EVS Broadcast Equipment S.A. - November 2012 Issue 6.00.A