Replace settings, Default replace settings – EVS IPDirector Version 6.0 - November 2012 Part 8 User's Manual User Manual

Page 219

Text mode
Original mode

How to Assign a Recorder To Ingest the Replace Clip
Into the Timeline

To assign a recorder channel to IPEdit, proceed as follows:

1. Right-click the Associated Recorder Channel zone in the Status bar. This is in the

lower left corner of the IPEdit main window:

The available recorder channels are displayed.

2. Select the recorder channel to be used:

You can now set up and use the Replace feature in IPEdit.

Note

To un-assign the recorder channel, double-click the Associated Recorder
Channel zone.

6.15.4. Replace Settings

Default Replace Settings

Generic default settings for the Replace function are defined in the window accessible via
the menu Tools > Settings, and IPEdit > Replace in the tree view.

The following screenshotshows the generic default settings:

IPDirector - Version 6.00 - User Manual - IPEdit

6. Timeline

207