Modifying audio swaps – EVS IPDirector Version 6.0 - November 2012 Part 8 User's Manual User Manual
Page 203

6.13.9. Modifying Audio Swaps
How to Modify a Swap or Mute on one or More
Elements of an Audio Track
To modify a swap or mute defined on one or more elements of an audio track, proceed as
follows:
1. In the general timeline display, select the elements of a track on which you want to
modify the swap. For a multiple selection, select the elements while pressing CTRL.
2. Right-click one of the selected elements and select Modify Swap/Mute.
The Swap/Mute Configuration window opens with the parameters defined on the first
swapped element of the selection.
3. Do one of the following to modify or add a swap or mute:
◦
For a swap, click in the matrix at the intersection between the source channel to
play and the output channel on which the source should be played.
◦
For mute, click in the matrix on the bullet located on the line of the output channel
to mute. If you click again, the bullet reappears and the channel is no longer
muted.
4. Repeat the step 3 on all the channels that you want to swap or mute.
5. Click Apply.
The selected swaps or mutes are modified according to the new settings.
How to Modify a Swap or Mute Defined From and to
Given Points of a Track
To modify an audio swap or mute defined on a part of an audio track, proceed as follows:
1. In the general timeline display, click the Swap/Mute Zoom button
on the right of
the track on which to add the swap or mute.
The track is displayed in Swap/Mute Zoom mode.
2. Select the swaps you want to modify in one of the following ways:
◦
Lasso the swap point(s) to select from right to left.
◦
Right-click the swap point(s) to select, keeping CTRL pressed for multiple
selections.
3. Right-click and select Modify Swap/Mute.
The Swap/Mute Configuration window opens.
4. Do one of the following to modify or add a swap or mute:
◦
For a swap, click in the matrix at the intersection between the source channel to
play and the output channel on which the source should be played.
IPDirector - Version 6.00 - User Manual - IPEdit
6. Timeline
191