EVS IPDirector Version 6.0 - November 2012 Part 8 User's Manual - Manual (Page 119)

Replacing Timeline Elements From Nowline to OUT
Points
Description
The following schema shows how the Match Frame Replace is performed when timeline
elements are replaced from the nowline to the OUT point:
Procedure
To replace one or more timeline element(s) of the same source clip from the nowline to the
OUT point using the Match Frame Replace function, proceed as follows:
1. In the Player and Timeline panes, select the tracks to be taken into account when you
will insert the media. See section "Track Selection Applied to the Timeline Element"
on page 100.
2. In the Player panel, load the clip or train that contains the material to be inserted into
the timeline.
3. Click in the jog bar to define the reference position in the loaded media.
4. In the loaded timeline, place the nowline on the element(s) to be replaced from the
nowline to the OUT point.
5. Do one of the following to execute the Match Frame Replace:
◦ Click + simultaneously in the Player.
◦ Press + on the keyboard.
IPDirector - Version 6.00 - User Manual - IPEdit
6. Timeline 107