beautypg.com

Example – EVS IPDirector Version 6.0 - November 2012 Part 8 User's Manual User Manual

Page 195

background image

2. Right-click in the audio track.

3. Select Add Swap/Mute.

The Swap/Mute Configuration window is displayed.

Example

Initial Situation

The timeline audio configuration is 4 tracks of 2 channels. You want to play the channels
a7 and a8 (G4 track) of the source media onto the output channels a5 and a6 respectively
(G3 track) of the selected part of the track.

Manual Swap Action

You will perform the swap action from a given point to another point of the G3 track. In this
track, you specify which source channels will be played on the channels of the G3 track.
In this case, you will map:

the source channel a7 to the output channel a5 and

the source channel a8 to the output channel a6.

Result

In the general timeline display (upper screenshot below), you can see the swap icons on
the G3 track, which means that channels are swapped on this track.

In the Swap/Mute Zoom display (lower screenshot below), you can see that the channels
a7 and a8 are played instead of a5 and a6 on track G3 from the mark IN point to the mark
OUT point.

IPDirector - Version 6.00 - User Manual - IPEdit

6. Timeline

183